Flower Slippers Crochet Pattern: Pretty Floral Slippers in 7 Steps

Plain house slippers keep your feet warm; these make you smile every time you look down. This flower slippers crochet pattern builds a soft, well-shaped slipper — a counted oval sole, low sides and a neatly rounded toe — then finishes each with a small cream flower sewn on top. The flower is only three rounds, but it turns an everyday pair into the prettiest slippers by the door.

The slipper underneath is practical too: increases shape the sole to a real foot, counted decreases round the toe without bunching, and a corded reverse-crochet cuff stops the opening stretching. Work them in blush pink as shown, or in one colour with the flower as the only contrast. Either way, this flower slippers crochet pattern stays quick, cosy and giftable.

Why You Will Love These Slippers

• The flower takes minutes. Three quick rounds, sewn on at the end, and a plain slipper becomes a gift-worthy pair.
• A sole that is shaped, not guessed. Every increase round is counted at toe and heel, so the sole lies flat and follows your foot.
• A rounded toe with no bunching. The decreases sit inside one marked front section, so the top curves smoothly over your toes.
• Three sizes, one method. Only the starting chain and the totals change between S, M and L.
• Stash-friendly. A medium pair uses about 220 yards of worsted yarn, plus cream and gold scraps.

If slippers are becoming a habit, our crochet house slipper patterns roundup has ten more styles to try.

Materials and Gauge

What You Need

• Worsted weight (#4) yarn, approx. 220 yd (200 m) for size M — about 205 yd of the main colour (soft blush pink here), plus scraps of cream (about 12 yd) and golden yellow (about 3 yd) for the flowers. A wool blend is warmest; acrylic washes easiest.
• 5.0 mm (US H-8) crochet hook
• Stitch markers (at least 3), yarn needle, scissors and a tape measure
• Optional: non-slip sole pads, suede patches, or puffy fabric paint for grip (see Step 7)

New to yarn labels? The Craft Yarn Council’s standard yarn weight system explains what the #4 on the ball band means.

Useful Materials from Amazon

Everything for this flower slippers crochet pattern is easy to source:

A sturdy worsted in a soft colour is the base of the whole project — pick one that holds its shape.

Slipper fabric is worked firmly on purpose, and a soft-grip ergonomic 5 mm hook keeps your hand comfortable throughout.

Stick-on or sew-on pads make the finished slippers safe on wood and tile in about five minutes — the one addition I never skip.

Locking markers hold the centre-front section for the toe shaping and stay clipped in as you work.

Gauge and Sizes

Gauge: 14 sc and 16 rounds = 4 inches (10 cm) in single crochet with the 5.0 mm hook. Gauge matters on footwear — loose stretches baggy, tight pinches — so swatch first (Step 1). A quick swatch protects every flower slippers crochet pattern from sizing surprises.

Sizes: Written in full for size M; for S and L only the chain and totals change, with their front-section counts in Step 4.

Size	Foot length	Starting chain	Stitches after sole (Round 4)	Stitches after toe shaping (Round 13)
S (US 5–6)	9 in (23 cm)	ch 22	62	44
M (US 7–8)	9.75 in (25 cm)	ch 26	70	50
L (US 9–10)	10.5 in (26.5 cm)	ch 30	78	56

Finished sole (size M): approx. 9.75 × 3.75 in (25 × 9.5 cm).

Abbreviations (US Terms)

• ch = chain
• sc = single crochet
• hdc = half double crochet
• dc = double crochet
• hdc2tog = half double crochet 2 together (decrease)
• sl st = slip stitch
• BLO = back loop only
• st(s) = stitch(es)
• MR = magic ring

The Flower Slippers Crochet Pattern, Step by Step

Work Steps 1–6 for the first slipper, then repeat for the second in Step 7. Counts are for size M, with S and L totals in the table above.

Step 1 — Materials, Gauge and Sizes

Lay out your yarn, hook and markers, then swatch: chain 16, work 18 rows of single crochet, and measure the middle — 14 stitches and 16 rows should span 4 inches. Too many stitches means tight work: go up to a 5.5 mm hook; too few, drop to a 4.5 mm hook. Between sizes, pick the smaller one; slippers relax with wear. Getting gauge right is the secret to a flower slippers crochet pattern that fits first time.

Step 2 — The Sole Rounds

The sole is an oval worked in joined rounds around a foundation chain. With the main colour, chain 26.

• Round 1: 3 sc in the 2nd ch from the hook, sc in each of the next 23 ch, 3 sc in the last ch. Rotate the chain and work along the underside: sc in each of the next 23 ch. Join with a slip stitch to the first sc. (52 sc)
• Round 2: Ch 1, 2 sc in each of the first 3 stitches (the toe end), sc in each of the next 23 stitches, 2 sc in each of the next 3 stitches (the heel end), sc in each of the next 23 stitches. Join. (58 sc)
• Round 3: Ch 1, (sc in the next stitch, 2 sc in the next stitch) 3 times at the toe end, sc in each of the next 23 stitches, the same increase group 3 times at the heel end, sc in each of the next 23 stitches. Join. (64 sc)
• Round 4: Ch 1, (2 sc in the next stitch, sc in each of the next 2 stitches) 3 times at the toe end, sc in each of the next 23 stitches, the same increase group 3 times at the heel end, sc in each of the next 23 stitches. Join. (70 sc)

Check the oval against the table (M: about 9.75 inches long). Now mark the toe-shaping section: place a marker 14 stitches each side of the toe’s centre stitch, so 28 stitches sit between them at the front. Do not fasten off.

Step 3 — Sides

• Round 5: Ch 1, sc in the back loop only of every stitch around. Join. (70 sc) The back-loop round folds the fabric upward — the moment the oval becomes a slipper.
• Rounds 6–8: Ch 2 (does not count as a stitch), hdc in every stitch around. Join to the first hdc. (70 hdc per round)

After Round 8 the walls stand about 1 inch (2.5 cm) high. Slip it on: the sole should lie flat and the sides hug without gaping. If the opening already feels wide, your gauge is loose — restart on a smaller hook now, not later. That snug fit is what makes this flower slippers crochet pattern so comfortable to wear.

Step 4 — Toe Shaping

The rounded toe is made by decreasing inside the marked centre-front 28 stitches only; backs and sides stay plain. Count each round — every total is given.

• Round 9: Ch 2, hdc in every stitch, but across the front 28 stitches work (hdc in the next 5 sts, hdc2tog) 4 times. Join. (66 sts)
• Round 10: Hdc around, working (hdc in the next 4 sts, hdc2tog) 4 times across the front 24 sts. Join. (62 sts)
• Round 11: Hdc around, working (hdc in the next 3 sts, hdc2tog) 4 times across the front 20 sts. Join. (58 sts)
• Round 12: Hdc around, working hdc2tog 8 times evenly across the remaining 16 front sts. Join. (50 sts)
• Round 13: Ch 2, hdc in every stitch around. Join. (50 hdc)

For sizes S and L: mark the centre-front section the same way (S: 24 sts, L: 32 sts) and work the same four decrease rounds, decreases spaced evenly across the front — S: 62 → 58 → 54 → 50 → 44; L: 78 → 74 → 70 → 66 → 56 — then one even hdc round, as in Round 13.

The front should now curve into a smooth toe cap, with 50 stitches around the opening (44 for S, 56 for L). Set the body aside — the flower comes next.

Step 5 — The Flower (All 3 Rounds)

Three quick rounds make a flower about 2.5 inches (6.5 cm) across — the first thing anyone notices, yet small enough to sit neatly on the toe. Make one per slipper.

• Round 1 (golden yellow): Make a magic ring, ch 1, work 10 sc into the ring. Pull the ring closed and join with a slip stitch to the first sc. Fasten off. (10 sc)
• Round 2 (cream): Join the cream yarn in any sc. Ch 1, work 2 sc in every sc around. Join to the first sc. (20 sc)
• Round 3 (cream, the petals): *Skip the next stitch, (2 dc, ch 2, 2 dc) in the next stitch, skip the next stitch, slip stitch in the next stitch; repeat from * 4 more times. (5 petals; 20 dc in total) Fasten off, leaving a 12-inch tail for sewing.

Each Round 3 repeat uses 4 stitches and makes one plump shell petal with a ch-2 point at its tip. Count five petals before fastening off — four or six means a skip went astray. Cup the flower in your palm so the petals lift; that soft dome helps it sit prettily on the slipper. Love a floral finish? The same sew-on idea, scaled up, tops our poinsettia crochet flower pattern for Christmas makes.

Step 6 — Sewing the Flower On and Finishing the Cuff

First the cuff, which finishes the ankle opening of this flower slippers crochet pattern with a neat, firm edge that stops the opening stretching with wear:

• Round 14: Ch 1, sc in every stitch around. Join. (50 sc)
• Round 15: Ch 1, work reverse single crochet (crab stitch) in every stitch around. Join, fasten off and weave in the ends. (50 sts)

Now the flower. Try the slipper on, place the flower centred over the toe, its back edge about 1 inch in front of the opening, and pin it. Thread the flower’s long tail onto your needle and sew from the back, up through the slipper fabric and the flower’s Round 2 stitches — 8 to 10 evenly spaced stitches around the flower. Sew beneath the petals, not through them, so they stay puffy. Knot the tail inside, weave it in, and trim.

Step 7 — Second Slipper and Non-Slip Finish

Repeat Steps 2–6 exactly for the second slipper — the shaping is symmetrical, so there is no left or right foot. Weave in all ends, running tails back and forth through stitch backs. Try the pair on together and check the flowers sit level. Matching flowers and matching fit are the whole charm of this flower slippers crochet pattern.

Non-slip finish (strongly recommended for hard floors): the soles of this flower slippers crochet pattern are smooth crochet, so add grip before they meet wood or tile: sew or stick on non-slip sole pads at ball and heel; dot the soles with puffy fabric paint and dry 24 hours; or zigzag beads of hot glue across ball and heel and let them cool. For a textured pair next, our braid stitch slippers put a plait of puff stitches across the same cosy shape.

Tips

• Count the flower before you sew. Five petals, ten centre stitches — a quick check saves unpicking a finished slipper.
• Sew with a form inside. A rolled-up sock in the toe holds the shape and keeps the needle out of the sole.
• Keep sole rounds firm. The sole should feel denser than the sides; if your stitches run looser than your swatch, drop half a hook size for Rounds 1–4.
• Make both slippers close together. Tension drifts between sessions — a pair made a week apart can fit like cousins, not twins.

Common Mistakes and How to Fix Them

• The sole curls at the edges. Tension is too tight or an increase was missed — every sole round adds exactly 6 stitches, split between the ends. Count the ends, not just the total.
• The toe cap sits off to one side. The decrease section drifted from centre front. Recount the 28 front stitches on Round 9 and move any crept markers.
• The opening is too loose. The reverse-crochet cuff is the prevention — if you skipped Round 15, add it now; it pulls the opening in well.
• The flower looks flat. The petals were sewn through and squashed. Unpick and stitch only through Round 2 of the flower, then cup the petals back up.
• One slipper is bigger than the other. A tension drift between the pair. Measure both soles before sewing on the flowers — the longer one can spare an hdc round.

Frequently Asked Questions

Is this flower slippers crochet pattern suitable for beginners?

Yes, with one small step up. The stitches are everyday ones — single, half double and double crochet — and the only new technique is the counted decrease in Step 4.

How much yarn does one pair actually use?

About 220 yards of worsted for size M: roughly 205 yards of main colour, plus about 12 yards of cream and a few yards of gold for the flowers. One standard ball of main colour plus scraps covers any size.

Can I make the slippers without the flower?

You can — the cuff alone gives a clean, finished pair. But the flower takes fifteen minutes and makes the design. More blooms live in our collection of crochet flower pattern ideas.

How do I wash crocheted slippers?

Machine wash gentle and cool in a laundry bag, then reshape and dry flat. Keep hot water away from pure wool soles, which can felt. Gentle care keeps this flower slippers crochet pattern soft wash after wash.

What should I make for my feet next?

For full coverage next, our crochet sock patterns roundup has ten pairs, toe-up and cuff-down.

Final Thoughts

A pair of slippers is one of the most-given, most-worn things you can crochet, and this flower slippers crochet pattern is built to be both: a counted sole that fits, a shaped toe that does not flap, and a cream flower that makes the pair feel like a gift. Make the first pair in blush and cream, learn the rhythm, and the gift pairs will make themselves.